Infinity_QX4_1998-2003

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the or disconnect the following:

    Front wheel
     
    Wheel speed sensor, if equipped
     
    Locking hub or drive flange
     
    Snapring
     
    Spindle washer
     
    Thrust washer
     
    Inner CV-joint bolts
     
    Axle halfshaft. Separate the stub shaft from the spindle by tapping with a plastic hammer.
     

  4.  

To install:

  1. Install or connect the following:

    Axle halfshaft. Guide the stub shaft into the spindle and tighten the inner CV-joint bolts to 25 - 33 ft. lbs. (34 - 44 Nm).
     
    Thrust washer
     
    Spindle washer
     
    Snapring
     
    Locking hub or drive flange
     
    Wheel speed sensor, if equipped
     
    Front wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo