Infinity_QX4_1998-2003

Power Door Locks

Print

Door Lock Motor



Removal & Installation

NOTE
Note that the step numbers correspond with the numbers in the door panel illustration.

  1. For the front door, remove the inside handle escutcheon.
  2.  
  3. For the front door, remove the power window switch, then disconnect the connectors.
  4.  
  5. For the front door, remove the door armrest.
  6.  
  7. For the front door, remove the bolts securing the door panel.
  8.  
  9. For the front door, pull on door finisher to remove clips from door panel and remove door finisher, then disconnect glass hatch and fuel lid opener switch connector.
  10.  
  11. For the rear door, remove inside handle escutcheon.
  12.  
  13. For the rear door, remove power window switch, then disconnect the connector.
  14.  
  15. For the rear door, remove door armrest cap.
  16.  
  17. For the rear door, remove bolts securing door panel.
  18.  
  19. For the rear door, pull on door finisher to remove clips from door panel and remove door panel.
  20.  
  21. Remove the retainers, detach the connector and remove the door lock actuator.
  22.  
  23. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Door panel removal and installation-(1 of 2)



    Click image to see an enlarged view

    Fig. Door panel removal and installation-(2 of 2)



    Click image to see an enlarged view

    Fig. Location of the door lock actuator-front door shown

  24.  

Door Lock Switch



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Carefully remove the power door lock switch, then disconnect the connectors.
  4.  
  5. Installation is the reverse of the removal procedure.
  6.  

 
label.common.footer.alt.autozoneLogo