Infinity_QX4_1998-2003

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the or disconnect the following:

    Pitman arm
     
    Steering column intermediate shaft
     
    Power steering hoses
     
    Steering gear
     

  4.  

To install:

  1. Install or connect the following:

    Steering gear. Tighten the bolts to 62 - 71 ft. lbs. (84 - 96 Nm).
     
    Power steering hoses. Tighten the banjo fittings to 29 - 38 ft. lbs. (39 - 51 Nm).
     
    Steering column intermediate shaft. Tighten the pinch bolt to 17 - 22 ft. lbs. (24 - 29 Nm).
     
    Pitman arm. Tighten the nut to 174 - 195 ft. lbs. (235 - 265 Nm).
     

  2.  
  3. Check the wheel alignment and adjust, as necessary.
  4.  

 
label.common.footer.alt.autozoneLogo