Infinity_QX4_1998-2003

Starter

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the or disconnect the following:

    Negative battery cable
     
    Engine under cover
     
    Starter harness connectors
     
    Starter motor
     

  4.  

To install:

  1. Install or connect the following:

    Starter motor. Tighten the bolts to 22 - 27 ft. lbs. (30 - 36 Nm) on the 3.3L engine; or to 37 - 45 ft. lbs. (61 - 69 Nm) on the 3.5L engine.
     
    Starter harness connectors
     
    Engine under cover
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo