Infinity_QX56_2004-2005

Ignition Coil Module

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the engine room cover.
  4.  
  5. Disconnect the harness connector from the ignition coil.
  6.  
  7. Remove the ignition coil retaining bolt.
  8.  
  9. Remove the ignition coil.
  10.  

To install:

  1. Install the ignition coil, torque the retaining bolt to 80 inch lbs.
  2.  
  3. Connect the harness coil.
  4.  
  5. Connect the negative battery cable.

    Click image to see an enlarged view

    Fig. Ignition coil and related components

  6.  

 
label.common.footer.alt.autozoneLogo