Infinity_QX56_2004-2005

Stabilizer Bar (Sway Bar)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Remove the tire and wheel assembly.
  6.  
  7. Remove the engine under cover.
  8.  
  9. Remove the stabilizer bar mounting bracket retaining bolts and rubber bushings.
  10.  
  11. Remove the connecting rod nuts.
  12.  
  13. Remove the stabilizer bar from the vehicle.
  14.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Tighten the retaining bushing and mounting bar bracket bolts to 94 ft. lbs.
  4.  
  5. Tightening the connecting rod bolt and nut to 62 ft. lbs.
  6.  

 
label.common.footer.alt.autozoneLogo