Infinity_QX56_2004-2005

Wheel Bearings

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheel
     
    Engine splash guard
     
    Brake caliper without disconnecting the hydraulic lines, and reposition aside with wire
     

  4.  
  5. Matchmark the brake rotor to the wheel hub and remove the brake rotor.
  6.  
  7. Remove or disconnect the following:

    Cotter pin and locknut from driveshaft
     
    Driveshaft from wheel hub and bearing assembly
     
    ABS sensor
     
    Wheel hub and bearing assembly bolts
     
    Wheel hub and bearing assembly

    Click image to see an enlarged view

    Fig. Front hub/bearing assembly

     

  8.  

To install:

  1. Install or connect the following:

    Wheel hub and bearing assembly, using new bolts and tighten to 155 ft. lbs. (210 Nm)
     
    ABS sensor
     
    Driveshaft to wheel hub and bearing assembly
     
    Cotter pin and locknut and tighten to 101 ft. lbs. (137 Nm)
     
    Brake rotor
     
    Brake caliper
     
    Engine splash guard
     
    Wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo