Infinity_QX56_2004-2005

Shock Absorber

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the rear wheel.
  4.  
  5. Release the air pressure from the rear load leveling air suspension system using the CONSULT-II EXHAUST SOLENOID active test.
  6.  
  7. Remove or disconnect the following:

    Rear fender protector
     
    Rear load leveling air suspension hose from the shock absorber
     
    Shock absorber upper and lower end bolts
     
    Shock absorber

    Click image to see an enlarged view

    Fig. Standard rear suspension



    Click image to see an enlarged view

    Fig. Rear load leveling air suspension

     

  8.  

To install:

  1. Install or connect the following:

    Shock absorber and tighten end bolts to 129 ft. lbs. (175 Nm)
     
    Rear load leveling air suspension hose
     
    Rear fender protector
     
    Rear wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo