Infinity_QX56_2004-2005

Starter

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the intake manifold.
  4.  
  5. Remove the starter harness connectors.
  6.  
  7. Remove the starter retaining bolts.
  8.  
  9. Remove the starter from its mounting.
  10.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Tighten the retaining bolts to 34 ft. lbs.
  4.  
  5. Tighten the terminal nut to 8 ft. lbs.

    Click image to see an enlarged view

    Fig. Starter location

  6.  

 
label.common.footer.alt.autozoneLogo