Honda CRV/Odyssey 1995-2000 Repair Information

Door Panels

Print

REMOVAL & INSTALLATION CRV Models



See Figures 1 through 11

Click image to see an enlarged view

Fig. Fig. 1: Remove the screw from the door handle trim



Click image to see an enlarged view

Fig. Fig. 2: Remove the screws from the arm rest supports



Click image to see an enlarged view

Fig. Fig. 3: Remove the center pin from the panel clip, then remove the clip



Click image to see an enlarged view

Fig. Fig. 4: Slide the handle assembly forward using 2 screwdrivers. One inserted in the housing, the other to tap lightly with



Click image to see an enlarged view

Fig. Fig. 5: Once the handle slides forward, the retaining hook will release, allowing you to remove the handle



Click image to see an enlarged view

Fig. Fig. 6: Push the lock rod clip to release the rod



Click image to see an enlarged view

Fig. Fig. 7: Unplug the connector from the electric door lock before removing the door handle



Click image to see an enlarged view

Fig. Fig. 8: Remove the speaker grille by carefully prying at the small opening at the bottom of the grill



Click image to see an enlarged view

Fig. Fig. 9: Remove the speaker, then remove the door panel screws



Click image to see an enlarged view

Fig. Fig. 10: Once all the fasteners are removed, use a suitable door panel trim tool to release the door panel clips ...



Click image to see an enlarged view

Fig. Fig. 11: ... then carefully lift the door panel up and away from the door

  1. Remove the screw from the door handle trim, then slide the handle assembly forward and out to access the lock rod clip. Release the clip, disconnect the door lock switch and remove the door opener handle assembly.
  2.  
  3. Carefully pry at the small opening on the bottom of the speaker grill, and remove the grille.
  4.  
  5. Remove the speaker mounting screws, detach the electrical connector and remove the speaker.
  6.  
  7. Remove the screws in the armrest.
  8.  
  9. Remove the center from the trim clip at the upper front of the door panel and remove the clip.
  10.  
  11. Using a suitable trim panel removal tool, unsnap the door panel from the door frame.
  12.  
  13. Carefully lift the door panel up and away from the door frame.
  14.  
  15. Installation is the reverse of the removal procedure.
  16.  

Odyssey Models

4-CYLINDER ENGINES
  1. Remove the screw in the door handle trim, slide the handle assembly forward, and out to access the lock rod clip. Release the clip, disconnect the door lock switch and remove the door opener handle assembly.
  2.  
  3. Carefully pry off the cap(s) in the armrest pocket, then remove the screw(s).
  4.  
  5. Carefully pry off the cap under the armrest and remove the screw.
  6.  
  7. Using a suitable trim panel removal tool, unsnap the door panel from the door frame.
  8.  
  9. Unplug the electrical connectors for the power windows, power mirror and courtesy light.
  10.  
  11. Carefully lift the door panel up and away from the door frame.
  12.  
  13. Installation is the reverse of the removal procedure.
  14.  

V6 ENGINES
  1. Remove the screw in the door handle trim, slide the handle assembly forward, and out to access the lock rod clip. Release the clip, disconnect the door lock switch and remove the door opener handle assembly.
  2.  
  3. Carefully unsnap the rear of the speaker grill, lift and pull back to release it and remove the grille.
  4.  
  5. Remove the panel mounting screws located around the perimeter of the speaker.
  6.  
  7. Remove the cap and screw in the pull pocket of the armrest.
  8.  
  9. Slide the pocket back slightly to release the front hook, then lift up, detach the electrical connectors and remove the pocket assembly.
  10.  
  11. Using a suitable trim panel removal tool, unsnap the door panel from the door frame.
  12.  
  13. Carefully lift the door panel up and away from the door frame slightly and disconnect the speaker connector.
  14.  
  15. Installation is the reverse of the removal procedure.
  16.  

 
label.common.footer.alt.autozoneLogo