Isuzu_Amigo_1998-2000

Overhaul

Print

Outboard Joint



The outer CV-joint is serviced with the axle shaft as an assembly. The outer CV-joint boot can be serviced by removing the inner CV-joint.

Inner Joint



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Halfshaft from the vehicle
     
    Snapring and bearing
     
    Snapring and oil seal
     
    Mounting bracket
     
    CV-joint boot
     
    Circlip and inner joint housing
     
    Snapring and spacer
     
    Inner joint balls
     
    Snapring and inner CV-joint

    Click image to see an enlarged view

    Fig. CV-joint spacer snapring-Inner CV-Joint

     

  4.  

To install:

  1. Install or connect the following:

    Inner CV-joint and snapring
     
    Inner joint balls
     
    Spacer and snapring
     
    Inner joint housing and circlip. Add 150 grams CV-joint grease.
     
    CV-joint boot
     
    Mounting bracket
     
    Oil seal and snapring
     
    Bearing and snapring
     

  2.  
  3. Install the halfshaft and mounting bracket to the vehicle.
  4.  
  5. Check the wheel alignment and adjust as necessary.
  6.  

 
label.common.footer.alt.autozoneLogo