Isuzu_Amigo_1998-2000

Upper Ball Joints

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Support the lower control arm with a floor jack.
  4.  
  5. Remove or disconnect the following:

    Front wheel
     
    Wheel speed sensor
     
    Upper ball joint

    Click image to see an enlarged view

    Fig. Exploded view of the control arm and ball joint components

     

  6.  

To install:


NOTE
Use new nuts, bolts and split pins for assembly.

  1. Install or connect the following:

    Upper ball joint. Tighten the mounting bolts to 42 ft. lbs. (57 Nm) and the nut to 72 ft. lbs. (96 Nm).
     
    Wheel speed sensor
     
    Front wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo