Isuzu Ascender 2003-05

Removal & Installation

Print

  1. Remove the right closeout/insulator panel.
  2.  
  3. Remove the I/P storage compartment door.
  4.  
  5. Disconnect the blower motor electrical connector.
  6.  
  7. Remove the blower motor mounting screws.
  8.  
  9. Remove the blower motor cooling tube.
  10.  
  11. Remove the blower motor (2).

    Click image to see an enlarged view

    Fig. Blower motor removal

  12.  
  13. Install the blower motor (2).
  14.  
  15. Install the blower motor cooling tube.
  16.  
  17. Install the blower motor mounting screws.
  18.  
  19. Tighten the screws to 18 inch. lbs. (2 Nm)
  20.  
  21. Connect the blower motor electrical connector.
  22.  
  23. Install the right closeout/insulator panel.
  24.  

 
label.common.footer.alt.autozoneLogo