Isuzu Ascender 2003-05

Outside Mirrors

Print

Power Mirrors



Diagnosis & Testing
  1. Check all fuses.
  2.  
  3. Inspect battery condition and connections.
  4.  
  5. Inspect all grounds are clean and tight.
  6.  
  7. Search for applicable service bulletins.
  8.  
  9. Check for voltage and ground at mirror motor and switch.
  10.  

Removal & Installation
Motor
  1. Remove the mirror face.
  2.  
  3. Remove the screws retaining the mirror to the mirror housing.
  4.  
  5. Remove the mirror motor from the housing.
  6.  
  7. Disconnect the electrical connector from the mirror motor.

    Click image to see an enlarged view

    Fig. Mirror motor removal

  8.  

To install:

  1. Connect the electrical connector to the mirror motor.
  2.  
  3. Install the mirror motor to the mirror housing.
  4.  
  5. Install the screws retaining the mirror motor to the housing.
  6.  
  7. Tighten the mirror motor screws to 88 inch. lbs. (10 Nm).
  8.  
  9. Install the mirror face.
  10.  

Switch
  1. Carefully use a flat-bladed tool in order to release the outside mirror switch retaining tabs from the trim panel.
  2.  
  3. Remove the outside mirror switch from the trim panel.
  4.  
  5. Disconnect the electrical connector from the power folding mirror switch.

    Click image to see an enlarged view

    Fig. Mirror switch

  6.  

To install:

  1. Connect the electrical connector to the power folding mirror switch.
  2.  
  3. Position the power folding mirror switch to the door trim panel.
  4.  
  5. Apply downward pressure to the power folding mirror switch, ensuring the retaining tabs are fully seated.
  6.  

 
label.common.footer.alt.autozoneLogo