Isuzu Ascender 2003-05

Upper Control Arms

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Tire and wheel assembly
     
    Upper ball joint-to-upper control arm pinch bolt and nut
     
    Upper control arm from the knuckle
     
    Anti-lock Brake System (ABS) wheel speed sensor wiring harness
     
    Upper control arm mounting bolts
     
    Upper control arm
     

  4.  

To install:

  1. Install or connect the following:

    Upper control arm and tighten the bolts to 111 ft. lbs. (150 Nm)
     
    ABS wheel speed sensor wiring harness
     
    Upper control arm to the steering knuckle
     
    Upper ball joint-to-upper control arm pinch bolt and nut and tighten to 30 ft. lbs. (40 Nm)
     
    Tire and wheel
     

  2.  
  3. Check the front wheel alignment.
  4.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Tire and wheel assembly
     
    Upper ball joint-to-upper control arm pinch bolt and nut
     
    Upper control arm from the knuckle
     
    Anti-lock Brake System (ABS) wheel speed sensor wiring harness
     
    Upper control arm mounting bolts
     
    Upper control arm
     

  4.  

To install:

  1. Install or connect the following:

    Upper control arm and tighten the bolts to 111 ft. lbs. (150 Nm).
     
    ABS wheel speed sensor wiring harness
     
    Upper control arm to the steering knuckle
     
    Upper ball joint-to-upper control arm pinch bolt and nut and tighten to 30 ft. lbs. (40 Nm).
     
    Tire and wheel
     

  2.  
  3. Check the front wheel alignment.
  4.  

 
label.common.footer.alt.autozoneLogo