Isuzu Ascender 2003-05

Leak Testing

Print


CAUTION
Compressed air mixed with R-134a forms a combustible vapor. The vapor can burn or explode causing serious injury. Never use compressed air to pressure test R-134a service equipment or vehicle air conditioning system.


CAUTION
Air conditioning refrigerant or lubricant vapor can irritate your eyes, nose, or throat. Be careful when connecting service equipment. Do not breathe refrigerant or vapor.

  1. Connect a R-134a refrigerant recovery/recycling/charging station (A) to the high-pressure service port (B) and the low-pressure service port (C), as shown, following the equipment manufacturer's instructions.

    Click image to see an enlarged view

    Fig. R-134a recovery/recycling and charging station

  2.  
  3. Open high pressure valve to charge the system to the specified capacity, then close the supply valve, and disconnect the charging station fittings.
  4.  
  5. Select the appropriate units of measure for your refrigerant charging station.
  6.  
  7. Refrigerant capacity for 2003-06.
    1. 0.86kg-1.9 lbs.
    2.  
    3. Rear air 1.2kg-2.65 lbs.
    4.  

  8.  
  9. Check the system for leaks using a R-134a refrigerant leak detector with an accuracy of 14 g (0.5 oz) per year or better.
  10.  
  11. If you find leaks that require the system to be opened (to repair or replace hoses, fittings, etc.), recover the system.
  12.  
  13. After checking and repairing leaks, the system must be evacuated.
  14.  

 
label.common.footer.alt.autozoneLogo