Isuzu Ascender 2003-05

Bleeding

Print

  1. Fill pump reservoir with fluid to minimum system level, FULL COLD level, or middle of hash mark on cap stick fluid level indicator.
  2.  
  3. Raise the vehicle until the front wheels are off the ground.
  4.  
  5. Key on engine OFF, turn the steering wheel from stop to stop 12 times.
  6.  
  7. Verify power steering fluid level per operating specification.
  8.  
  9. Start the engine. Rotate steering wheel from left to right. Check for sign of cavitation or fluid aeration (pump noise/whining).
  10.  
  11. Verify the fluid level. Repeat the bleed procedure, if necessary.
  12.  

 
label.common.footer.alt.autozoneLogo