Isuzu Ascender 2003-05

Stabilizer Bar (Sway Bar)

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove the stabilizer shaft links to the stabilizer shaft retaining nuts.
  4.  
  5. Remove the stabilizer shaft insulator clamp mounting bolts.
  6.  
  7. Remove the stabilizer shaft insulator clamp from the stabilizer shaft insulator.
  8.  
  9. Remove the stabilizer shaft insulators from the stabilizer shaft.
  10.  
  11. Remove the stabilizer shaft from the vehicle.
  12.  

To install:

  1. Install the stabilizer shaft to the vehicle.
  2.  
  3. Install the stabilizer shaft insulators to the stabilizer shaft.
  4.  
  5. Install the stabilizer shaft insulator clamp to the stabilizer shaft insulator.
  6.  
  7. Install the stabilizer shaft insulator clamp mounting bolts and tighten to 41 ft. lbs. (55 Nm) on the front or 52 ft. lbs. (70 Nm) on the rear.
  8.  
  9. Install the stabilizer shaft links to the stabilizer shaft and tighten to 74 ft. lbs. (100 Nm).
  10.  
  11. Lower the vehicle.
  12.  

 
label.common.footer.alt.autozoneLogo