Isuzu Ascender 2003-05

Removal & Installation

Print

  1. Disable the SIR system.
  2.  
  3. Remove the inflator module.
  4.  
  5. Remove the horn plunger from the steering column by pressing inward to the stop and rotating horn plunger 90 degrees.
  6.  
  7. Disconnect the steering wheel electrical connector.
  8.  
  9. Remove the retaining nut which secures the steering wheel to the steering wheel shaft.
  10.  
  11. Install steering wheel puller.
  12.  
  13. Remove steering wheel.

    Click image to see an enlarged view

    Fig. Steering wheel and puller

  14.  

To install:

  1. Install the steering wheel to the steering wheel shaft.
  2.  
  3. Install the retaining nut that secures the steering wheel to the steering wheel shaft.
  4.  
  5. Tighten the retaining nut to 30 ft. lbs. (41 Nm).
  6.  
  7. Connect the steering wheel electrical connector.
  8.  
  9. Install the horn plunger to the steering column.
  10.  
  11. Install the inflator module.
  12.  
  13. Enable the SIR system.
  14.  

 
label.common.footer.alt.autozoneLogo