Isuzu Axiom 2002-05

Wheel Speed Sensors

Print

Removal & Installation



Front
  1. Raise and safely support the vehicle.
  2.  
  3. Remove the speed sensor connector.
  4.  
  5. Remove frame side and upper arm and knuckle side sensor cable mounting bolts.
  6.  
  7. Remove the sensor mounting bolt, then remove the speed sensor.

    Click image to see an enlarged view

    Fig. Exploded view of the speed sensor connector (1), frame side sensor cable mounting bolt (2), upper arm side sensor cable mounting bolt (3), knuckle side sensor cable mounting bolt (4), sensor mounting bolt (5) and speed sensor (6)

  8.  

To install:

  1. Install speed sensor and take care not to hit the speed sensor pole during installation.
  2.  
  3. Install the speed sensor mounting bolt and tighten the mounting bolt to 66 inch lbs. (7.5 Nm).
  4.  
  5. Install the upper arm and knuckle side speed sensor cable mounting bolts and tighten the bolts to 66 inch lbs. (7.5 Nm).
  6.  
  7. Install the frame side speed sensor cable mounting bolt and tighten the bolt to 87 inch lbs. (10 Nm).
    NOTE
    Make sure the cable is not twisted when connecting the speed sensor cable.

  8.  
  9. Install speed sensor connector.
  10.  
  11. Carefully lower the vehicle.
  12.  

Rear
  1. Disconnect harness connector (1).
  2.  
  3. Remove the speed sensor mounting bolt (2), then remove the speed sensor (3).

    Click image to see an enlarged view

    Fig. Exploded view of the harness connector (1), sensor mounting bolt (2) and rear speed sensor (3)

  4.  

To install:

  1. Install speed sensor (3).
  2.  
  3. Tighten the sensor mounting bolt (2) to 17 ft. lbs. (24 Nm).
  4.  
  5. Connect the harness connector (1).
  6.  

 
label.common.footer.alt.autozoneLogo