Isuzu Axiom 2002-05

Engine

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Battery
     
    Hood
     
    Air cleaner assembly
     
    Canister vacuum line
     
    Brake booster vacuum line
     
    Engine wiring harness connectors
     
    Transmission harness connectors and bracket
     
    Engine ground cable
     
    Bonding cable connectors
     
    Starter harness connector
     
    Alternator harness connector
     
    Coolant reservoir tank hose
     
    Radiator hoses
     
    Upper fan shroud
     
    Cooling fan
     
    Accessory drive belt
     
    Power steering pump
     
    A/C compressor
     
    Heated Oxygen (HO2S) sensor connectors
     
    Left and right exhaust front pipes
     
    Flywheel dust cover
     
    Heater hoses
     
    Fuel lines
     
    Transmission. Refer to the transmission procedure in this section.
     
    Accelerator cable
     
    Cruise control cable
     
    Left and right engine mounts
     
    Engine
     

  6.  

To install:

  1. Install or connect the following:

    Engine
     
    Left and right engine mounts. Tighten the bolts to 30 ft. lbs. (41 Nm).
     
    Transmission
     
    Flywheel dust cover
     
    Fuel lines
     
    Left and right exhaust front pipes
     
    HO2S sensor connectors
     
    A/C compressor
     
    Power steering pump
     
    Accessory drive belt
     
    Cooling fan. Tighten the nuts to 16 ft. lbs. (22 Nm).
     
    Radiator
     
    Upper fan shroud
     
    Heater hoses
     
    Radiator hoses
     
    Coolant reservoir tank hose
     
    Alternator harness connector
     
    Starter harness connector
     
    Engine ground cable
     
    Transmission harness connectors and bracket
     
    Engine wiring harness connectors
     
    Brake booster vacuum line
     
    Canister vacuum line
     
    Cruise control cable
     
    Accelerator cable
     
    Air cleaner assembly
     
    Hood
     
    Battery
     

  2.  
  3. Fill the cooling system. Check all fluid levels and adjust as necessary.
  4.  
  5. Start the engine and check for leaks.
  6.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Battery
     
    Hood
     
    Air cleaner assembly
     
    Canister vacuum line
     
    Brake booster vacuum line
     
    Engine wiring harness connectors
     
    Transmission harness connectors and bracket
     
    Engine ground cable
     
    Bonding cable connectors
     
    Starter harness connector
     
    Alternator harness connector
     
    Coolant reservoir tank hose
     
    Radiator hoses
     
    Upper fan shroud
     
    Cooling fan
     
    Accessory drive belt
     
    Power steering pump
     
    A/C compressor
     
    Heated Oxygen (HO 2 S) sensor connectors
     
    Left and right exhaust front pipes
     
    Flywheel dust cover
     
    Heater hoses
     
    Fuel lines
     
    Transmission. Refer to the transmission procedure in this section.
     
    Accelerator cable
     
    Cruise control cable
     
    Left and right engine mounts
     
    Engine
     

  6.  

To install:

  1. Install or connect the following:

    Engine
     
    Left and right engine mounts. Tighten the bolts to 30 ft. lbs. (41 Nm).
     
    Transmission
     
    Flywheel dust cover
     
    Fuel lines
     
    Left and right exhaust front pipes
     
    HO 2 S sensor connectors
     
    A/C compressor
     
    Power steering pump
     
    Accessory drive belt
     
    Cooling fan. Tighten the nuts to 16 ft. lbs. (22 Nm).
     
    Radiator
     
    Upper fan shroud
     
    Heater hoses
     
    Radiator hoses
     
    Coolant reservoir tank hose
     
    Alternator harness connector
     
    Starter harness connector
     
    Engine ground cable
     
    Transmission harness connectors and bracket
     
    Engine wiring harness connectors
     
    Brake booster vacuum line
     
    Canister vacuum line
     
    Cruise control cable
     
    Accelerator cable
     
    Air cleaner assembly
     
    Hood
     
    Battery
     

  2.  
  3. Fill the cooling system. Check all fluid levels and adjust as necessary.
  4.  
  5. Start the engine and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo