Isuzu Axiom 2002-05

Exhaust Manifold

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Air cleaner assembly
     
    Heated Oxygen (HO 2 S) sensor connectors
     
    Right torsion bar
     
    Exhaust Gas Recirculation (EGR) pipe and bracket
     
    Left and right exhaust front pipes
     
    Heat shields
     
    Accessory drive belt
     
    A/C compressor and bracket
     
    Exhaust manifolds
     

  4.  

To install:

  1. Install or connect the following:

    Exhaust manifolds. Tighten the bolts to 38 ft. lbs. (52 Nm).
     
    A/C compressor and bracket
     
    Accessory drive belt
     
    Heat shields
     
    Left and right exhaust front pipes
     
    EGR pipe and bracket
     
    Right torsion bar
     
    HO 2 S sensor connectors
     
    Air cleaner assembly
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks.
  4.