Isuzu Axiom 2002-05

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Raise the vehicle and support the frame with suitable safety stands.
  2.  
  3. Remove the splash guard.
  4.  
  5. Remove wheel and tire assembly.
  6.  
  7. Remove the nut (4).
    WARNING
    Be careful not to break the ball joint boot.

  8.  
  9. Remove the link.
  10.  
  11. Remove the bracket.
  12.  
  13. Remove the stabilizer bar.
  14.  
  15. Remove the rubber bushing.

    Click image to see an enlarged view

    Fig. Exploded view of the rubber bushing (1), bracket and bolt (2), link (3), nut (4), stabilizer bar (5) and washer (6)

  16.  

To install:

  1. Install rubber bushing.
  2.  
  3. Install the stabilizer bar.
  4.  
  5. Install the bracket and bolt, then tighten it to 18 ft. lbs. (25 Nm).
  6.  
  7. Install the link.
  8.  
  9. Install the nut (4), and washer (6) then tighten to 37 ft. lbs. (50 Nm).
  10.  
  11. Carefully lower the vehicle.
  12.  

 
label.common.footer.alt.autozoneLogo