Isuzu Axiom 2002-05

Removal & Installation

Print

2-Wheel Drive



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disable the air bag system.
  4.  
  5. Remove or disconnect the following:

    Stone guard
     
    Tie rod from knuckle
     
    Power steering pressure and return lines
     
    Steering gear
     

  6.  

To install:

  1. Install or connect the following:

    Steering gear. Torque the mounting bolts to 85 ft. lbs. (116 Nm)
     
    Fluid lines. Torque the fitting to 18 ft. lbs. (25 Nm)
     
    Tie rod ends. 87 ft. lbs. (118 Nm)
     
    Stone guard
     

  2.  
  3. Fill and bleed the system.
  4.  

4-Wheel Drive



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disable the air bag system.
  4.  
  5. Remove or disconnect the following:

    Stone guard
     
    Tie rod from knuckle
     
    Power steering pressure and return lines
     
    Torsion bar
     
    Lower control arm frame side bolt
     
    Crossmember bolts
     
    Steering gear with crossmember
     
    Steering gear
     

  6.  

To install:

  1. Install or connect the following:

    Steering gear. Torque the mounting bolts to 85 ft. lbs. (116 Nm)
     
    Crossmember Torque the bolts to 128 ft. lbs. (173 Nm)
     
    Lower control arm bolt
     
    Torsion bar
     
    Fluid lines. Torque the fitting to 18 ft. lbs. (25 Nm)
     
    Tie rod ends. 87 ft. lbs. (118 Nm)
     
    Stone guard
     

  2.  
  3. Fill and bleed the system.
  4.  

 
label.common.footer.alt.autozoneLogo