Isuzu Axiom 2002-05

Removal & Installation

Print

  1. Remove the drive belt.
  2.  
  3. Place a drain pan below the pump.
  4.  
  5. Disconnect the suction hose.
  6.  
  7. Disconnect the flexible hose.
  8.  
  9. Remove the power steering mounting bolt and remove the pump assembly.

    Click image to see an enlarged view

    Fig. Exploded view of the power steering pump (1), suction hose (2), flexible hose (3) and bolt (4)

  10.  

To install:

  1. Install the pump assembly to the pump bracket, tighten the mounting bolt to 34 ft. lbs. (46 Nm).
  2.  
  3. Install the flexible hose and tighten the eye bolt to 40 ft. lbs. (54 Nm).
  4.  
  5. Install the drive belt.
  6.  
  7. Connect the suction hose, then fill and bleed system as outlined later in this section.
  8.  

 
label.common.footer.alt.autozoneLogo