Isuzu Axiom 2002-05

Starter

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Heated Oxygen (HO 2 S) sensor connectors
     
    Exhaust front pipe
     
    Heat shield
     
    Starter wiring connectors
     
    Starter motor

    Click image to see an enlarged view

    Fig. Exploded view of the terminal -30- (1), terminal -50- (2), mounting bolts (3) and starter motor (4)

     

  4.  

To install:

  1. Install or connect the following:

    Starter motor. Tighten the bolts to 30 ft. lbs. (40 Nm).
     
    Starter wiring connectors. Tighten to 78 inch lbs. (9 Nm).
     
    Heat shield
     
    Exhaust front pipe
     
    Heated Oxygen (HO 2 S) sensor connectors
     
    Negative battery cable

    Click image to see an enlarged view

    Fig. Exploded view of the starter and exhaust pipe tightening specifications

     

  2.  

 
label.common.footer.alt.autozoneLogo