Isuzu Axiom 2002-05

Transfer Case Removal & Installation

Print

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Transfer case skid plate
     
    Front and rear driveshafts
     
    Breather hose
     
    Center exhaust pipe
     
    Vehicle Speed (VSS) sensor connector
     
    Harness connector
     

  4.  
  5. Support the transfer case
  6.  
  7. Remove or disconnect the following:

    Transfer case flange fasteners
     
    Transfer case
     

  8.  

To install:

  1. Install or connect the following:

    Transfer case. Tighten the flange fasteners to 34 ft. lbs. (46 Nm).
     
    Harness connector
     
    Breather hose
     
    VSS sensor connector
     
    Center exhaust pipe
     
    Front and rear driveshafts. Tighten the bolts to 46 ft. lbs. (63 Nm).
     
    Transfer case skid plate. Tighten the bolts to 27 ft. lbs. (37 Nm).
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo