Isuzu Cars and Trucks 1981-1991

Pinout Box

Print

Some diagnostic procedures require the installation of a pinout box (J35592) in order to prevent damage to the 35-pin EBCM connector. The pinout box should be installed prior to probing any circuit with a digital multimeter.

To install the pinout box:

  1. Ensure that the ignition switch is in the OFF position when removing the 35-pin EBCM connector.
  2.  
  3. Disconnect the connector by depressing the locking plate and rotating the connector toward the front of the car.
  4.  
  5. Inspect the 35-pin connector for damage. Install the pinout box (J35592) on the connector.
  6.  
  7. Proceed with test as outlined.
  8.  

 
label.common.footer.alt.autozoneLogo