Isuzu Cars and Trucks 1981-1991

Body Lubrication

Print

HOOD LATCH AND HINGES

Clean the latch surfaces and apply clean engine oil or all purpose lithium grease to the latch pilot bolts, spring anchor and hood hinges as well. Use a chassis grease to lubricate all the pivot points in the latch release mechanism.

DOOR HINGES

The gas tank filler door, car door, and rear hatch or trunk lid hinges should be wiped clean and lubricated with clean engine oil. Silicone spray also works well on these parts, but must be applied more often. Use engine oil to lubricate the trunk of hatch lock mechanism and the lock bolt and striker. The door lock cylinders can be lubricated easily with a shot silicone spray or one of the many dry penetrating lubricants commercially available.

PARKING BRAKE LINKAGE

Use chassis grease on the parking brake cable where it contacts the guides, links, levers, and pulleys. The grease should be a water resistant one for durability under the car.

ACCELERATOR LINKAGE

Lubricate the carburetor stud, carburetor lever, throttle body and the accelerator pedal lever at the support inside the car with clean engine oil or silicone spray.

TRANSMISSION SHIFT LINKAGE

Lubricate the shift linkage with water resistant chassis grease.

 
label.common.footer.alt.autozoneLogo