Isuzu Cars and Trucks 1981-1991

Windshield Wiper Switch

Print

REMOVAL AND INSTALLATION
RWD I-Mark
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the steering wheel as outlined in Suspension and Steering.
  4.  
  5. Remove the steering column cover and switch assembly.
  6.  

To install:

  1. Install and connect the switch.
  2.  
  3. Install steering column cover and wheel.
  4.  
  5. Connect the battery cable and check operation.
  6.  

FWD I-Mark, All Impulse and Stylus
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster hood retaining screws and lift the hood from the instrument panel.
  4.  
  5. Remove the wiper switch from hood.
  6.  
  7. Install the switch and cluster hood.
  8.  
  9. Connect the battery cable and check operation.
  10.  



Click image to see an enlarged view

Fig. Wiper switch and instrument cluster hood FWD I-Mark, RWD Impulse similar

P'up, Amigo, Trooper and Rodeo
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the steering wheel as outlined in .
  4.  
  5. Remove the steering column shroud and disconnect the multi-switch connector.
  6.  
  7. Remove the multi-switch assembly from the steering column.
  8.  
  9. Install the switch, column shroud and steering wheel.
  10.  
  11. Connect the battery cable and check operation.
  12.  

 
label.common.footer.alt.autozoneLogo