Isuzu Cars and Trucks 1981-1991

Door Panels

Print

REMOVAL AND INSTALLATION
  1. Remove arm rest attaching screws.
  2.  
  3. Remove window crank handle with appropriate clip removal tool.
  4.  
  5. Remove inside door handle cover attaching screw and trim plate.
  6.  
  7. Remove all external screws securing the door panel. Insert an appropriate pry tool between the door panel and door frame to remove the hidden clips securing the panel.
  8.  
  9. Holding door panel vertical lift straight up to release upper clip.
  10.  
  11. If equipped with power windows or door locks, the door panel must be removed first to gain access to the wiring harness. DO NOT remove door panel completely, but just enough to disconnect wiring harness.
  12.  
  13. Prior to installation, ensure that all clips remaining in door frame are removed and installed in door panel.
  14.  
  15. Installation is reverse of removal.
  16.  



Click image to see an enlarged view

Fig. Door panel P'up and Amigo



Click image to see an enlarged view

Fig. Door panel I-Mark



Click image to see an enlarged view

Fig. Door panel Trooper



Click image to see an enlarged view

Fig. Impulse attaching screw/clip location

 
label.common.footer.alt.autozoneLogo