Isuzu Cars and Trucks 1981-1991

Signal and Marker Lights

Print

REMOVAL AND INSTALLATION
Front Turn Signal and Parking
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the lens retaining screws.
  4.  
  5. Pull the assembly out of the bumper and remove the bulb.
  6.  
  7. Install the bulb and assembly into the vehicle.
  8.  
  9. Connect the battery cable and check operation.
  10.  



Click image to see an enlarged view

Fig. Typical turn signal and parking light

Side Marker Lights
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the lens retaining screws, lens assembly and bulb. Turn the bulb holder out of the lens to remove.
  4.  
  5. Install the bulb, lens assembly and retaining screws.
  6.  



Click image to see an enlarged view

Fig. Marker light removal side mounted type



Click image to see an enlarged view

Fig. Marker light removal corner mount type

Rear Turn Signal, Brake and Parking
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the lens retaining screws, lens and bulb for the P'up, Amigo, Trooper and Rodeo.
  4.  
  5. Enter the trunk or luggage compartment. Remove the garnish panel and remove the bulb socket for the cars.
  6.  
  7. Install the bulb and install the socket and garnish panel.
  8.  



Click image to see an enlarged view

Fig. Rear light assembly cars



Click image to see an enlarged view

Fig. Rear light assembly P'up, Trooper, Amigo and Rodeo

 
label.common.footer.alt.autozoneLogo