Isuzu Cars and Trucks 1981-1991

Brake Drums

Print

REMOVAL AND INSTALLATION
  1. Raise and safely support the vehicle.
  2.  
  3. Remove the rear wheel and tire assembly.
  4.  
  5. Remove the dust cap and cotter pin. Remove the castle nut, washer and outer wheel bearing.
  6.  
  7. Remove the brake drum/hub assembly with the inner wheel bearing.
  8.  
  9. Installation is the reverse of the removal procedure. Properly adjust the wheel bearings and install a new cotter pin.
  10.  

 
label.common.footer.alt.autozoneLogo