Isuzu Cars and Trucks 1981-1991

Control Arms

Print

REMOVAL AND INSTALLATION
  1. Raise the car and support it safely. Place a suitable jack under the rear axle to support the assembly during control arm removal.
  2.  
  3. Remove the bolt connecting the control arm to the axle case.
  4.  
  5. Remove the bolt connecting the control arm to the body.
  6.  
  7. Remove the control arm assembly.
  8.  
  9. Installation is the reverse of removal. Torque the bolts to specifications.
  10.  


NOTE
When reinstalling the control arm assembly, leave the bolts semi-tight. Lower the car before torquing any nuts. The vehicle weight should be on all suspension components when torquing the nuts.

 
label.common.footer.alt.autozoneLogo