Isuzu Cars and Trucks 1981-1991

Anti-Lock (Isolation/Dump) Valve

Print

REMOVAL AND INSTALLATION
  1. Disconnect negative battery cable.
  2.  
  3. Disconnect valve harness connector.
  4.  
  5. Disconnect brake pipes using a flare nut wrench.
  6.  
  7. Remove attaching bolt then remove anti-lock valve from frame rail.
  8.  
  9. Installation is the reverse of removal. Torque attaching bolt to 18 ft. lbs. and brake pipe to 12 ft. lbs.
  10.  



Click image to see an enlarged view

Fig. Anti-lock (isolation/dump) valve removal and installation

 
label.common.footer.alt.autozoneLogo