Isuzu Cars and Trucks 1981-1991

Rear Window Wiper Motor

Print

REMOVAL AND INSTALLATION
  1. Disconnect the negative battery cable.
  2.  
  3. Open the liftgate or hatchback. Remove the trim panel.
  4.  
  5. Remove the wiper arm assembly.
  6.  
  7. Remove the motor shaft nut, motor retaining bolts and disconnect wiring connectors.
  8.  
  9. Remove the motor from the access panel.
  10.  

To install:

  1. Install the motor into the access panel.
  2.  
  3. Install the motor shaft nut, motor retaining bolts and disconnect wiring connectors.
  4.  
  5. Install the wiper arm assembly.
  6.  
  7. Install the trim panel.
  8.  
  9. Connect the negative battery cable and check operation.
  10.  



Click image to see an enlarged view

Fig. Rear wiper motor FWD I-Mark



Click image to see an enlarged view

Fig. Rear wiper motor RWD Impulse



Click image to see an enlarged view

Fig. Rear wiper motor FWD Impulse



Click image to see an enlarged view

Fig. Rear wiper motor Rodeo



Click image to see an enlarged view

Fig. Rear wiper motor Trooper

 
label.common.footer.alt.autozoneLogo