Remove the fan shroud by performing the following:
Remove the radiator outlet hose
Release the differential vent hose retainer
Release the A/C suction hose retainer
Release the A/C discharge hose retainer
Rotate the slip ring counterclockwise from under the fan shroud
Remove the fan shroud
Install the Special Tool(s) J-46406 and J-41240-5A to the fan clutch.
Fig. Installing Special Tools J-46406 and J-41240-5A
Remove the fan hub nut in a counterclockwise rotation.
Fig. Removing fan hub nut and fan
Do not use or attempt to repair a damaged cooling fan assembly. Replace damaged fans with new assemblies. An unbalanced cooling fan could fly apart causing personal injury and property damage.
Install the Special Tool(s) J-46406 and the J-41240-5A to the fan clutch.
Install the fan hub nut to the pulley and hand tighten in a clockwise rotation. Tighten the fan clutch nut clockwise to 41 ft. lbs. (56 Nm).
Install the fan shroud by performing the following:
Install the fan shroud
Rotate the slip ring clockwise to the fan shroud
Connect the A/C discharge hose retainer
Connect the differential vent hose retainer
Connect the radiator outlet hose