Isuzu I-280, I-350 2005-06

Oil Pressure Sensor

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Disconnect the engine wiring harness electrical connector (2) from the oil pressure switch (1).

    Click image to see an enlarged view

    Fig. Disconnecting the engine wiring harness electrical connector from the oil pressure switch

  4.  
  5. Remove the engine oil pressure switch.

    Click image to see an enlarged view

    Fig. Removing the engine oil pressure switch

  6.  

To install:

  1. Install the engine oil pressure switch. Tighten the oil pressure switch to 15 ft. lbs. (20 Nm).
  2.  
  3. Connect the engine wiring harness electrical connector (2) to the oil pressure switch (1).
  4.  
  5. Lower the vehicle.
  6.  

 
label.common.footer.alt.autozoneLogo