Isuzu I-280, I-350 2005-06

Outside Mirrors

Print

Power Mirrors



Removal & Installation
Motor
  1. Remove the mirror glass by performing the following:
    1. Remove the mirror glass.
    2.  
    3. Remove the mirror glass from the mirror motor with sufficient force to disengage the snap-locks on the mirror motor.
    4.  

  2.  
  3. Remove the screws retaining the mirror motor to the mirror housing.

    Click image to see an enlarged view

    Fig. Removing mirror motor retaining screws

  4.  
  5. Rotate the bottom of the mirror motor upward to disengage the mirror motor (1) from the mirror housing retainers (2).
  6.  
  7. Disconnect the mirror motor electrical connectors.
  8.  
  9. Remove the mirror motor from the mirror housing.

    Click image to see an enlarged view

    Fig. Disengage the mirror motor from the mirror housing retainers

  10.  

To install:

  1. Position the mirror motor to the mirror housing.
  2.  
  3. Connect the mirror motor electrical connectors.
  4.  
  5. Install the mirror motor to the mirror housing by engaging the mirror motor to the mirror housing retainers and rotating the motor downward.
  6.  
  7. Install the screws retaining the mirror motor to the mirror housing. Tighten the mirror motor screws to 80 inch lbs. (9 Nm).
  8.  
  9. Install the mirror glass by performing the following:
    1. Position the mirror glass to the mirror motor.
    2.  
    3. Install the mirror glass to the mirror motor with the palm of the hand on the center of the glass, pressing in until fully seated.
    4.  
    5. Inspect the mirror for proper operation.
    6.  

  10.  

Switch
  1. For mirror switch removal and installation procedures, refer to Power Door Locks.
  2.  

 
label.common.footer.alt.autozoneLogo