Isuzu I-280, I-350 2005-06

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Properly relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel filler cap
     
    Quick connect fittings from the filter
     

  6.  
  7. Pry open the locking tabs of the mounting bracket enough to remove the fuel filter and remove the filter.
  8.  

To install:

Click image to see an enlarged view

Fig. Fuel filter mounting at the fuel tank

  1. Slide the filter into the mounting bracket until the lacking tabs are fully engaged.
  2.  
  3. Install or connect the following:

    Fuel quick disconnect fittings to the filter
     
    Fuel filler cap
     
    Negative battery cable
     

  4.  
  5. Turn the ignition ON for 10 seconds and then turn it OFF for 10 seconds. Again turn the ignition ON and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo