Isuzu I-280, I-350 2005-06

Locks & Lock Systems

Print

Power Door Locks



Removal & Installation
Door Lock Switch
Front
  1. Remove the 2 screws securing the switch plate assembly to the door trim panel.
  2.  
  3. Lift the front of the switch plate up to disengage clip.
  4.  
  5. Remove the switch plate out of the door trim panel opening.

    Click image to see an enlarged view

    Fig. Removing switch plate out of the door trim panel opening-front

  6.  
  7. Disconnect the electrical connectors (3, 4) from the switches (2, 5).
  8.  
  9. Remove the switch plate assembly (1) from the vehicle.
  10.  
  11. If replacing only the switches, remove the switches from the plate.
  12.  
  13. If replacing only the switch plate, retain the switches for transfer.
  14.  

To install:

  1. Install the switches to the switch plate.
  2.  
  3. Connect the electrical connectors to the switches.
  4.  
  5. Install the switch plate assembly to the door trim panel with the 2 screws. Tighten the front door switch plate screws to 18 inch lbs. (2 Nm).
  6.  

Rear
  1. Remove the 2 screws securing the switch plate assembly to the door trim panel.
  2.  
  3. Lift the switch plate up and out of the door trim panel.

    Click image to see an enlarged view

    Fig. Removing the screws securing the switch plate assembly to the door trim panel

  4.  
  5. Disconnect the electrical connectors from the switch module.
  6.  
  7. Remove the switch plate assembly from the vehicle.
  8.  
  9. If replacing only the switch module, remove the module from the switch plate.
  10.  
  11. If replacing only the switch plate, retain the switch module for transfer.

    Click image to see an enlarged view

    Fig. Remove the switch plate assembly from the vehicle

  12.  

To install:

  1. Install the switch module to the switch plate.
  2.  
  3. Connect the electrical connector to the switch module.
  4.  
  5. Install the rear switch plate assembly to the door trim panel with the 2 screws. Tighten the rear door switch plate screws to 18 inch lbs. (2 Nm).
  6.  

 
label.common.footer.alt.autozoneLogo