Isuzu_Rodeo_Rodeo_Sport_1997-2004

Ignition Coil Module

Print

Removal & Installation



2.2L Engine
  1. Disconnect the negative battery cable.
  2.  
  3. Detach the ignition module connector.
  4.  
  5. Remove any necessary retainers, then remove the ignition module.

    Click image to see an enlarged view

    Fig. Ignition module (1) mounting-2.2L engine

  6.  

To install:

  1. Install the ignition module and secure retainers, as necessary. Tighten the bolt to 15 ft. lbs. (20 Nm).
  2.  
  3. Attach the ignition module electrical connector.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo