Isuzu_Rodeo_Rodeo_Sport_1997-2004

Accessory Drive Belts

Print

Accessory Belt Routing





Click image to see an enlarged view

Fig. Accessory V-belt routing-2.2L engines



Click image to see an enlarged view

Fig. Accessory serpentine belt routing-3.2L engines



Click image to see an enlarged view

Fig. Accessory serpentine belt routing-3.5L engines



Click image to see an enlarged view

Fig. Accessory serpentine belt routing-3.2L and 3.5L VINY engines

Adjustment



Belt tension is maintained by an automatic tensioner. No adjustments are necessary or possible.

Inspection



Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove any necessary engine covers that are blocking access to the drive belt.
  4.  
  5. Use a wrench to rotate the drive belt tensioner, as shown in the accompanying figure, to remove drive belt.
  6.  
  7. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Using a wrench, rotate the drive belt tensioner as shown and remove the drive belt-2.2L engine shown, 3.2L and 3.5L similar

  8.  

 
label.common.footer.alt.autozoneLogo