Isuzu_Rodeo_Rodeo_Sport_1997-2004

Rear Main Seal

Print

Removal & Installation





Click image to see an enlarged view

Fig. Installing a one-piece rear crankshaft oil seal

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following: Negative battery cableTransmissionClutch assembly, if equipped with a manual transmissionFlywheel by loosening the flywheel bolts in a 2-step crisscross sequenceRear main seal, using a seal puller

    Negative battery cable
     
    Transmission
     
    Clutch assembly, if equipped with a manual transmission
     
    Flywheel by loosening the flywheel bolts in a 2-step crisscross sequence
     
    Rear main seal, using a seal puller
     

  4.  


NOTE
Do not damage the crankshaft sealing surface.

To install:

  1. Install or connect the following: New rear main seal, by lubricating it with engine oilFlywheel, using new flywheel bolts. Tighten the bolts, in a 2-step crisscross pattern, to 40 ft. lbs. (54 Nm).Clutch assembly, if removedTransmissionNegative battery cable

    New rear main seal, by lubricating it with engine oil
     
    Flywheel, using new flywheel bolts. Tighten the bolts, in a 2-step crisscross pattern, to 40 ft. lbs. (54 Nm).
     
    Clutch assembly, if removed
     
    Transmission
     
    Negative battery cable
     

  2.  
  3. Check the oil and refill as necessary.
  4.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:
    NOTE
    Do not damage the crankshaft sealing surface.



    Negative battery cable
     
    Transmission
     
    Clutch assembly, if equipped with a manual transmission
     
    Flywheel by loosening the flywheel bolts in a 2-step crisscross sequence
     
    Rear main seal, using a seal puller
     

  4.  

To install:

Click image to see an enlarged view

Fig. Installing a one-piece rear crankshaft oil seal

  1. Install or connect the following:

    New rear main seal, by lubricating it with engine oil
     
    Flywheel, using new flywheel bolts. Tighten the bolts, in a 2-step crisscross pattern, to 40 ft. lbs. (54 Nm).
     
    Clutch assembly, if removed
     
    Transmission
     
    Negative battery cable
     

  2.  
  3. Check the oil and refill as necessary.
  4.  

 
label.common.footer.alt.autozoneLogo