Isuzu_Rodeo_Rodeo_Sport_1997-2004

Torsion Bar

Print

Removal & Installation





Click image to see an enlarged view

Fig. Exploded view of the torsion bar assembly

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Matchmark the adjusting bolt and end piece, then remove the bolt, end piece, and seat.
  4.  
  5. Matchmark the height control arm to the torsion bar, then remove the height control arm.
  6.  
  7. Matchmark the torsion bar to the lower control arm, then remove the torsion bar.
  8.  

To install:

  1. Apply grease to the torsion bar splines.
  2.  
  3. Apply grease to the contact points of the height control arm, adjusting bolt end piece and seat.
  4.  
  5. Align the matchmarks and install the torsion bar.
  6.  
  7. Align the matchmarks and install the height control arm.
  8.  
  9. Install the adjusting bolt, seat and end piece.
  10.  
  11. Tighten the adjusting bolt to align the matchmarks.
  12.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Matchmark the adjusting bolt and end piece, then remove the bolt, end piece, and seat.

    Click image to see an enlarged view

    Fig. Matchmark the height control arm to the torsion bar

  4.  
  5. Matchmark the height control arm to the torsion bar, then remove the height control arm.

    Click image to see an enlarged view

    Fig. Matchmark the height control arm to the torsion bar

  6.  
  7. Matchmark the torsion bar to the lower control arm, then remove the torsion bar.

    Click image to see an enlarged view

    Fig. Matchmark the torsion bar to the lower control arm



    Click image to see an enlarged view

    Fig. Exploded view of the torsion bar assembly

  8.  

To install:

  1. Apply grease to the torsion bar splines.
  2.  
  3. Apply grease to the contact points of the height control arm, adjusting bolt end piece and seat.

    Click image to see an enlarged view

    Fig. Torsion bar identification

  4.  
  5. Align the matchmarks and install the torsion bar.
  6.  
  7. Align the matchmarks and install the height control arm.
  8.  
  9. Install the adjusting bolt, seat and end piece.
  10.  
  11. Tighten the adjusting bolt to align the matchmarks.
  12.  

 
label.common.footer.alt.autozoneLogo