Jaguar 2000-06

Removal & Installation

Print

Re-Circulation Blend Door Actuator



  1. Remove the glove compartment.
  2.  
  3. Remove the recirculation blend door actuator retaining bolts.
  4.  
  5. Disconnect the recirculation blend door actuator electrical connector.
  6.  
  7. Remove the recirculation blend door actuator and disconnect the control rod.
  8.  
  9. To install, reverse removal procedure.
  10.  

Instrument Panel Blend Door Actuator



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the glove compartment.
  4.  
  5. Disconnect the electrical connector.
  6.  
  7. Disconnect the instrument panel blend door actuator remote linkage.
  8.  
  9. Remove the instrument panel blend door actuator retaining bolts.
  10.  
  11. Remove the instrument panel blend door actuator.
  12.  
  13. To install, reverse removal procedure.
  14.  

Defrost Vent/Register Blend Door Actuator



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument panel.
  4.  
  5. Disconnect the electrical connector. Remove the defrost vent/register blend door actuator.
  6.  
  7. To install, reverse removal procedure.
  8.  

Footwell Vent/Duct Blend Door Actuator



  1. Disconnect the negative battery cable.
  2.  
  3. Reposition the in-vehicle temperature sensor venturi pipe.
  4.  
  5. Disconnect the electrical connector.
  6.  
  7. Remove the retaining bolts.
  8.  
  9. Remove the footwell vent/duct blend door actuator.
  10.  
  11. To install, reverse removal procedure.
  12.  

Cold Air Bypass Blend Door Actuator



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the driver side instrument panel lower trim panel.
  4.  
  5. Disconnect the cold air bypass blend door actuator electrical connector.
  6.  
  7. Remove the cold air bypass blend door actuator retaining bolts.
  8.  
  9. Remove cold air bypass blend door actuator.
  10.  
  11. To install, reverse removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo