Jaguar 2000-06

Alternator

Print

Removal & Installation



Except 4.2L
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Air intake assembly
     
    Cooling fan assembly
     
    Supercharger drive belt, if equipped
     
    Accessory drive belt
     
    Alternator air intake ducting
     
    Alternator wiring connectors
     
    Supercharger water pump, if equipped
     
    Alternator
     

  4.  

To install:

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Install or connect the following:

    Alternator. Tighten the mounting bolts to 28-35 ft. lbs. (38-48 Nm).
     
    Supercharger water pump, if equipped
     
    Alternator wiring connectors
     
    Alternator air intake ducting
     
    Accessory drive belt
     
    Supercharger drive belt, if equipped
     
    Cooling fan assembly
     
    Air intake assembly
     
    Negative battery cable
     

  4.  

4.2L Engines
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belt
     
    Alternator cooling duct
     
    Splash shield
     
    Right side lower engine mount bolt
     

  4.  
  5. Using suitable lifting device, raise engine slightly.
  6.  
  7. Remove the steering gear shaft pinch bolt.
  8.  
  9. Remove the steering gear mounting bolts and suspend gear out of the way.
  10.  
  11. Remove the engine mounting bracket assembly.
  12.  
  13. Remove the alternator wiring connectors and alternator.
  14.  

To install:

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Install or connect the following:

    Alternator. Tighten the upper bolt to 15 ft. lbs. (21 Nm) and the lower bolt to 30 ft. lbs. (40 Nm).
     
    Alternator wiring connectors
     
    Engine mounting bracket. Tighten bolts to 18 ft. lbs. (25 Nm).
     
    Steering gear. Tighten bolts to 74 ft. lbs. (100 Nm).
     
    Steering gear pinch bolt. Tighten bolts to 26 ft. lbs. (35 Nm).
     
    Right side lower engine mount bolt. Tighten bolt to 46 ft. lbs. (63 Nm).
     
    Splash shield
     
    Alternator cooling duct
     
    Accessory drive belt
     
    Negative battery cable
     

  4.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belt
     
    Alternator cooling duct
     
    Splash shield
     
    Right side lower engine mount bolt
     

  4.  
  5. Using suitable lifting device, raise engine slightly.
  6.  
  7. Remove the steering gear shaft pinch bolt.
  8.  
  9. Remove the steering gear mounting bolts and suspend gear out of the way.
  10.  
  11. Remove the engine mounting bracket assembly.
  12.  
  13. Remove the alternator wiring connectors and alternator.
  14.  

To install:

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Install or connect the following:

    Alternator. Tighten the upper bolt to 15 ft. lbs. (21 Nm) and the lower bolt to 30 ft. lbs. (40 Nm).
     
    Alternator wiring connectors
     
    Engine mounting bracket. Tighten bolts to 18 ft. lbs. (25 Nm).
     
    Steering gear. Tighten bolts to 74 ft. lbs. (100 Nm).
     
    Steering gear pinch bolt. Tighten bolts to 26 ft. lbs. (35 Nm).
     
    Right side lower engine mount bolt. Tighten bolt to 46 ft. lbs. (63 Nm).
     
    Splash shield
     
    Alternator cooling duct
     
    Accessory drive belt
     
    Negative battery cable
     

  4.  

Installation



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Install or connect the following:

    Alternator. Tighten the upper bolt to 13-18 ft. lbs. (18-24 Nm) and the lower bolt to 28-35 ft. lbs. (38-48 Nm).
     
    Supercharger water pump, if equipped
     
    Alternator wiring connectors
     
    Alternator air intake ducting
     
    Accessory drive belt
     
    Supercharger drive belt, if equipped
     
    Cooling fan assembly
     
    Air intake assembly
     
    Negative battery cable
     

  4.  

Removal



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Air intake assembly
     
    Cooling fan assembly
     
    Supercharger drive belt, if equipped
     
    Accessory drive belt
     
    Alternator air intake ducting
     
    Alternator wiring connectors
     
    Supercharger water pump, if equipped
     
    Alternator
     

  4.  

 
label.common.footer.alt.autozoneLogo