Jaguar 2000-06

Hydraulic System

Print

Hydraulic System Bleeding



The clutch system can be bled using a pressure bleeder. Follow the instructions that come with the pressure bleeder for the proper pressure bleeding procedure.

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. To bleed the system perform the following:
    1. Top off the hydraulic fluid reservoir using a fluid that meets the standards of the vehicle-s hydraulic system.
    2.  
    3. Open the clutch slave cylinder bleed screw and press the clutch pedal to the floor and hold the pedal down.
    4.  
    5. Close the clutch slave cylinder bleed screw.
    6.  
    7. Release the clutch pedal.
    8.  
    9. Check the hydraulic fluid level and top off as necessary.
    10.  

  4.  
  5. Repeat the above steps until the discharged fluid is clean and no air bubbles appear during the bleeding process.
  6.  

The clutch system can be bled using a pressure bleeder. Follow the instructions that come with the pressure bleeder for the proper pressure bleeding procedure.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. To bleed the system perform the following:
    1. Top off the hydraulic fluid reservoir using a fluid that meets the standards of the vehicle-s hydraulic system.
    2.  
    3. Open the clutch slave cylinder bleed screw and press the clutch pedal to the floor and hold the pedal down.
    4.  
    5. Close the clutch slave cylinder bleed screw.
    6.  
    7. Release the clutch pedal.
    8.  
    9. Check the hydraulic fluid level and top off as necessary.
    10.  

  4.  
  5. Repeat the above steps until the discharged fluid is clean and no air bubbles appear during the bleeding process.
  6.  

 
label.common.footer.alt.autozoneLogo