Jaguar 2000-06

Removal & Installation

Print

  1. Drain and recycle the engine coolant.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the accessory drive belt.
  6.  
  7. Disconnect the compressor electrical connector.
  8.  
  9. Detach the compressor supply and return tubes.
  10.  
  11. Remove the compressor O-rings.
  12.  
  13. Remove the compressor.
  14.  
  15. Remove the clutch and clutch field coil.
  16.  
  17. To install, reverse removal procedure. Tighten A/C compressor bolts to: 18 ft. lbs. (25 Nm).
  18.  

2.5L And 3.0L Engine



  1. Drain and recycle the engine coolant.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the air deflector.
  6.  
  7. Detach the accessory drive belt.
  8.  
  9. Disconnect the A/C compressor supply and return lines.
  10.  
  11. Disconnect the A/C compressor electrical connector.
  12.  
  13. Remove the A/C compressor.
  14.  
  15. To install, reverse removal procedure. Tighten A/C compressor bolts to: 18 ft. lbs. (25 Nm).
  16.  

4.0L And 4.2L Engines



  1. Drain and recycle the engine coolant.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the left-hand wheel and tire assembly.
  6.  
  7. Remove the air deflector.
  8.  
  9. Reposition the drive belt splash shield.
  10.  
  11. Disconnect the A/C compressor electrical connector.
  12.  
  13. Detach the A/C compressor supply and return lines.
  14.  
  15. Remove and discard the A/C compressor O-ring seals.
  16.  
  17. Remove the steering gear shaft pinch bolt.
  18.  
  19. Detach the steering gear.
  20.  
  21. Secure the steering gear.
  22.  
  23. Remove the left-hand engine mounting lower retaining bolt.
  24.  
  25. Lower the vehicle.
  26.  
  27. Remove the air cleaner outlet pipe.
  28.  
  29. Remove the accessory drive belt.
  30.  
  31. Vehicles without supercharger, remove the throttle body.
  32.  
  33. Install the engine left-hand lifting eye 303-749
  34.  
  35. Using the special tools 303-021 and 303-749, raise the engine to a suitable height.
  36.  
  37. Raise the vehicle.
  38.  
  39. Remove the engine mounting and bracket assembly.
  40.  
  41. Lower the vehicle.
  42.  
  43. Remove the A/C compressor lower left-hand retaining bolt.
  44.  
  45. Remove the A/C compressor.
  46.  
  47. To install, reverse removal procedure. Tighten A/C compressor bolts to: 18 ft. lbs. (25 Nm).
  48.  

 
label.common.footer.alt.autozoneLogo