Jaguar 2000-06

Removal & Installation

Print

3.0L Engines





Click image to see an enlarged view

Fig. Removing ignition coil plug-3.0L Engines

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. For the right hand bank, remove or disconnect the following:

    Negative battery cable
     
    Intake manifold
     
    Electrical connector
     
    Ignition coil securing bolt
     
    Ignition coil
     

  4.  
  5. For the left hand bank, remove or disconnect the following:

    Engine cover
     
    Electrical connector
     
    Ignition coil securing bolt
     
    Ignition coil
     

  6.  
  7. To install, reverse removal procedure.
  8.  

4.0L Engine





Click image to see an enlarged view

Fig. Removing ignition coil plug-4.0L Engines

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Engine cover
     
    Negative battery cable
     

  4.  
  5. For the left hand bank, remove the following:

    Evaporative emission canister purge valve
     
    Oil level indicator
     
    Power assisted steering fluid reservoir
     
    Engine breather hose
     

  6.  
  7. For the right hand bank, remove the air intake tube.
  8.  
  9. For both banks, remove the ignition coil cover, the ignition coil electrical connector and the ignition coil.
  10.  
  11. To install, reverse removal procedure.
  12.  



Click image to see an enlarged view

Fig. Disconnecting electrical connectors



Click image to see an enlarged view

Fig. Disconnecting electrical connectors

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Coolant expansion tank for access. Position tank aside and secure with suitable tie
     
    Six coil on-plug cover bolts and coil on-plug cover
     
    Harness from retaining clips as necessary and disconnect relevant coil connector
     
    Ignition coil
     

  4.  
  5. To install, reverse removal procedure.
  6.  

2.5L & 3.0L Engines





Click image to see an enlarged view

Fig. Removing ignition coil on plug

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Ignition coil-on-plug cover
     
    ignition coil-on-plug electrical connector
     
    ignition coil-on-plug
     

  4.  
  5. To install, reverse removal procedure.
  6.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable

    Click image to see an enlarged view

    Fig. Disconnecting electrical connectors



    Click image to see an enlarged view

    Fig. Removing ignition coils

     
    Electrical connectors
     
    Ignition coils
     

  4.  
  5. To install, reverse removal procedure.
  6.  

4.0L & 4.2L Engines



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Oil level indicator
     
    Ignition coil-on-plug cover
     
    Ignition coil-on-plug electrical connector

    Click image to see an enlarged view

    Fig. Disconnecting brake servo pressure sensor electrical connector-S-Type Models

     
    For S-Type models only, brake servo pressure sensor electrical connector
     
    Ignition coil-on-plug
     

  4.  
  5. To install, reverse removal procedure.

    Click image to see an enlarged view

    Fig. Removing ignition coil-on-plug

  6.  

 
label.common.footer.alt.autozoneLogo